gtech.com.vn
  
 

Elcometer Marine Kit 1 Standard

Bookmark and Share

Mô tả


The Elcometer Marine Inspection Kits have been specifically designed for this purpose and contain all the equipment required by the Marine Coatings Inspector to test and monitor all the parameters stipulated in the new IMO regulation.

 

The rule states that 90% of all thickness measurements shall be greater than or equal to NDFT (Nominal Dry Film Thickness) and none of the remaining 10% measurements shall be below 0.9 x NDFT. This is one of the hardest standards to calculate and almost impossible without the aid of print outs, calculators or computers.

 

An Elcometer 456 Digital Coating Thickness Gauge is supplied as standard with each kit. The Elcometer 456 is the world's first and only coating thickness gauge which can be used in accordance with the new PSPC 90/10 rule.

elcometer-marine-kit-1-standard

Đặc điểm kỹ thuật

 
ONTENTS

Model Description
Elcometer 122 Testex Replica Tape - Coarse, 20-64µm (0.5-2.5mils) More Information
Elcometer 122 Testex Replica Tape - X-Coarse, 38-115µm (1.5-4.5mils) More Information
Elcometer 122 Testex Replica Tape - X-Coarse Plus, 116-147µm (4.6-5.8mils) More Information
Elcometer 124 Thickness Gauge More Information
Elcometer 224 Integral Digital Surface Profile Gauge Model B, 0-500µm (0-20mils) More Information
Elcometer 128 Pictorial Surface Standard, BS EN ISO 8501-1:2007/SIS 055900 More Information
Elcometer 142 ISO 8502-3 Dust Tape Test Kit More Information
Elcometer 138 Bresle Salt Kit More Information
Elcometer 319 Digital Dewpoint Meter Standard More Information
Elcometer 3236 Hexagonal Wet Film Comb, 20 - 370µm comb More Information
Elcometer 456 Separate Digital Coating Thickness Gauge, Ferrous Model T More Information
Elcometer 456 Ferrous Standard Separate Probe, 0 – 5mm (0 - 200mils) More Information
Elcometer 144 Paint Safe Marker Pens More Information
Elcometer 147 Weld Gauge More Information
  ElcoMaster™ 2.0 Software CD and USB Cable More Information
Part Number Description
YKIT-MARINE-1S Elcometer Marine Inspection Kit 1 Standard


Can be used in accordance with:
IMO MSC.215(82), IMO MSC.216 (82), US Navy PPI 63101-000, US Navy NSI009-32

Phụ kiện

 
E122----B1 Elcometer 122 Testex® Replica Tape: Coarse, 20 - 64µm (0.5 - 2.5mils)
E122----C1 Elcometer 122 Testex® Replica Tape: X-Coarse, 38 - 115µm (1.5 - 4.5mils)
E122----F1 Elcometer 122 Testex® Replica Tape: X-Coarse Plus, 116 - 147µm (4.6 - 5.8mils)
T12222498 Elcometer 122: Swizzle Sticks (Pack of 5)
T22420053 Elcometer 224: Replacement Tips (Pack of 2) with Fixing Tool
T22420095 Elcometer 224: Replacement Tips (Pack of 5)
T22419793 Elcometer 224: Tip Protection Cap
T99022255-9 Elcometer 224: Foil Set Scale SP1‡
T99022255-9C Elcometer 224: Certified Foil Set Scale SP1‡
T22420072 Elcometer 224: Glass Zero Tile
T14219451 Elcometer 142: Test Record Sheet Pad (25 sheets)
T14219454 Elcometer 142: Display Board
T14219525 Elcometer 142: Dust Assessment Plate
T14223003 Elcometer 142: Adhesive Tape, 1 Roll
T99911344 Elcometer 138: Pure Water, 250ml
T13818517 Elcometer 138: 5ml Syringes – without needles (Pack of 3)
T13818518 Elcometer 138: Needles (Pack of 3)
T13818519 Elcometer 138: 30ml Beaker
T13818515 Elcometer 138: Horiba B-173 Conductivity Meter
T13818516 Elcometer 138: Conductivity Calibration Solutions for Horiba B-173
T31920162 Elcometer 319: Magnetic Surface Probe; -40 to 80ºC (-40 to 176ºF)
T9996390- Elcometer 319: Liquid Temperature Probe; -200 to 1100ºC (-328 to 2012ºF)
T456CF2S Elcometer 456: Ferrous Standard Separate Probe, 0 - 5mm (0 - 200mils)
T99022255-2 Elcometer 456: Scale 2 Foil Set∆
T99022255-2C Elcometer 456: Certified Scale 2 Foil Set∆
T9994910- Elcometer 456: Ferrous Zero Test Plate ±1%; 50.8 x 25.4mm (2.0 x 1.0")
T9999529- Elcometer 456: Ferrous Zero Test Plate ±2%; 76.2 x 50.8mm (3.0 x 2.0")
T99921325 Elcometer 224, 319 & 456: USB Cable

 ‡ Scale SP1 Set contains foil sizes: 125 & 500µm (5 & 20mils)

† Scale 1 Set contains foil sizes: 25, 50, 125, 250, 500 & 1000µm (1, 2, 5, 10, 20 & 40mils)

∆ Scale 2 Set contains foil sizes: 25, 50, 125, 250, 500, 1000µm, 2mm & 3mm (1, 2, 5, 10, 20, 40, 80 & 120mils)

CÔNG TY CỔ PHẦN CÔNG NGHỆ VÀ HỆ THỐNG TOÀN CẦU (GTECH SYSTEMS., JSC)
Địa chỉ: Phòng 107-Tòa nhà A - Tổ 51- Ngõ 270 - Đường Trung Kính - Quận Cầu Giấy - Hà Nội - Việt Nam
Tel: 84-24-37820054/ Fax: 84-24-37820964/ Email: info@gtech.com.vn; Sales@gtech.com.vn; www.gtech.com.vn