Elcometer 4695 Scrub Test Panels

In a typical scrub test, the coating is applied to the Leneta Scrub Test Panel at a specified film thickness, allowed to dry and then subjected to scrubbing with a straight-line scrub tester.

When used in accordance with ASTM D2486, Method A, a 10 mil shim is inserted under the panel to accelerate failure and thereby reduce testing time.

The scrub resistance is the number of scrub cycles required to remove the coating to a specified end point.

Alternatively, the loss in weight is determined after a specified number of scrub resistance cycles, with calculation of equivalent loss in film thickness.

Part Number		Description	Chart Dimensions		Quantity per Box	Boxes per Case
Box	Case		mm	inches
K0004695M068	K0004695M268	Leneta Scrub Test Panel P121-10N	165 x 432	6½ x 17	100	5
K0004695M069	K0004695M269	Leneta Scrub Test Panel P122-10N	165 x 432	6½ x 17	100	5

KT001720P012

ASTM Test Foil 250µm (10mils)