Hệ thiết bị theo dõi khí hậu Elcometer 320

Using readily available, off the shelf components the Elcometer 320 - together withElcoMonitor™ Software and the Elcometer 319 Dewpoint Meter - is a powerful system which simply and accurately monitors climatic parameters in any number of locations.

The Elcometer 319 is connected to a signal tower and alarm via an embedded PC which is connected to the control and monitoring computers via standard Ethernet TCP/IP or by Bluetooth® for remote monitoring. 

• Each red, yellow, green signal tower has an integrated alarm which provides both visual and audible warnings for up to two measurement parameters
• Remotely monitor and record climatic parameters:
  - Relative Humidity
  - Air Temperature
  - Surface Temperature
  - Specific Humidity
  - TΔ (the difference between Surface Temperature and Dewpoint) 
• The Elcometer 320 can also be used as a stand alone environmental warning station - ideal for single zone monitoring
• The Elcometer 319 Dewpoint Meter can be disconnected and used for more in depth localised investigation before being reconnected to the network
• Each monitoring station can be set up remotely either by Bluetooth® or over an Ethernet TCP/IP connection

Accurate

• Meets ISO 8502-4
• Rapid response time
• Each instrument is supplied with a Calibration Certificate
• Readings are switchable between Celsius and Fahrenheit
• Time and date stamp is recorded for each set of readings

Simple

• Easy to use, purpose designed software allows rapid station setup
• When the alarm sounds, operators can read the clear, illuminated Elcometer 319 which displays*
  RH: % Relative Humidity
  Ts: Surface Temperature
  Ta: Ambient Air Temperature
  SH: Specific Humidity
  TΔ: the difference between the Td and Ts
• Arrow indicators show temperature trends

Flexible

• Each Elcometer 319 gauge can also be used as a hand-held dewpoint meter and by selecting the “Te” mode transforms the gauge into a simple thermometer - ideal for measuring a coating’s temperature prior to application or other external temperatures (Te)
• Integrated K-Type connector allows measurement of surface temperature during remote logging
• Each monitoring station is fully modular - add up to 254 stations, when you need to

Versatile

• Each station can be set up remotely using ElcoMonitor™ Software. Station Setups include:
  - Which two climate parameters to be used for each station
  - User definable red, yellow and green warning limits
  - Flashing red light additional warning parameter
  - Data recording frequency
  - Warning buzzer alarm duration 
• Each measurement station’s data is automatically transmitted to the computer, either via Ethernet or Bluetooth®, and evaluated using the ElcoMonitor™ Software

*Dewpoint Temperature (Td), Wet Bulb (Twb) and Dry Bulb (Tdb) parameters can also be displayed by the Elcometer 319