Elcometer 208 & 208DL Ultrasonic Thickness Gauges

Mô tả

Rugged & repeatable hand held gauges designed to non destructively measure the thickness of metal substrates whilst ignoring the thickness of up to 2mm (80mils) of an applied coating (Echo to Echo mode).

T92016967	5MHz High Damped Transducer - Steel Applications
T92016968	7.5MHz High Damped Transducer - Aluminium, Stainless Steel & Titanium Applications

Supplied with or without data logging, each gauge can be used with the wide range of measurement transducers and is supplied with a wide range of functionality including Scan mode and Alarm mode.

Elcometer 208DL only - ElcoMaster™2.0

Select from transducer options

Definitions:

Echo-to-Echo Mode:
Measuring materials as thin as 0.15mm (0.006”) the Echo-to-Echo mode ignores the thickness of any coating applied to the surface under inspection.

Scan Mode:
Measuring up to 16 readings per second, the gauge captures the minimum recorded thickness.

Alarm Mode:
Once a minimum acceptable thickness has been set, a red LED illuminates and a buzzer sounds if a measurement falls below the preset value.

elcometer-208-&-208DL-ultrasonic-thickness-gauges

Đặc điểm kỹ thuật

Part Number	C208----1	C208DL----1
Model	Elcometer 208	Elcometer 208DL
Echo-to-Echo Mode	•	•
Scan Mode	•	•
Alarm Mode	•	•
Data Output (Immediate)	•	•
Data Logging (Memory)		1000 readings
ElcoMaster™ Software		•
Maximum Measurement Range	0.63 - 500mm (0.025 - 20”), 2.54 - 25.4mm (0.1 - 1.0”) in Echo-to-Echo Mode
Velocity Range	1250 - 10000m/s (0.0492 - 0.3937 in/µs)
Accuracy	±0.1mm (0.004”)
Resolution	0.01mm (0.001”)
Units	Millimetres and Inches
Operating Temperature	-20°C to 50°C (-4°F to 120°F)
Keypad Type	Sealed Membrane
Display	114mm (4½”) Digit Liquid Crystal Display with backlight
Battery Type	2 x LR6 (AA) 1.5V Alkaline or 1.2V NiCad cell
Weight	295g (10oz)
Dimensions	63.5 x 120.6 x 31.75mm (2.5 x 4.75 x 1.25”)
Certificate available	Certificate of Calibration: issued for Fixed Calibration equipment and shows readings and traceability Accredited Certificate: can be issued for Fixed Calibration Equipment and a full UKAS traceable certificate is issued from an independent Calibration Laboratory
Packing List	Elcometer 208 or 208DL gauge, bottle of couplant, battery x2, carry case and operating instructions. Elcometer 208DL only: CD with ElcoMaster™ software and data transfer cable

Can be used in accordance with:
ASTM E 797, EN 15317

Phụ kiện

T92015701	Ultrasonic Couplant, 120ml (4fl oz) Bottle
T92015874	High Temperature Ultrasonic Couplant, 60ml (2fl oz) Bottle
T9205243-	Test Wedge: 2 - 25mm (0.07 - 0.98”) in 6 Steps
T9205270-	Test Wedge: 30 - 100mm (1.18 - 3.93”) in 8 Steps

Máy đo độ dày thép bằng siêu âm Elcometer 208 & 208DL

Mô tả

Đặc điểm kỹ thuật

Phụ kiện