| Elcometer 121/4 Standard P.I.G. |
Elcometer 121/4 Top P.I.G. |
| Part Number |
A121---S |
A121---T |
| Range |
2 - 2000µm (0.08 - 80mils) Accuracy is dependent on tool cut angle, half a division |
| Dimensions |
110 x 75 x 30mm (4.3 x 3 x 1.2”), 369g (13oz) |
110 x 75 x 40mm (4.3 x 3 x 1.6 ), 383g (13.5oz) |
| Certificate available |
Certificate of Calibration: issued for Fixed Calibration equipment and shows readings and
traceability.
Accredited Certificate: can be issued for Fixed Calibration Equipment and a full UKAS
traceable certificate is issued from an independent Calibration Laboratory. |
| Packing List |
Elcometer 121/4, cutters 1, 4 and 6, x50 microscope, 4 x AG3 batteries for lamp (fitted), hexagonal wrench, black marker pen, wrist strap, carry case and operating instructions |
Can be used in accordance with:
Standard: AS1580.108.2, ASTM D 4138-A, BS 3900-C5-5B, DIN 50986, ISO 2808-5B, ISO 2808-6B, JIS K 5600-1-7, NF T30-123
Top: as above plus AS 1580.408.4, AS 3894.9, BS3900-E6, EN 13523-6, ECCA T6, ISO 16276-2, ISO 2409, NF T30-038
Standards in grey have been superseded but are still recognised in some industries
