Mô tả

The SG80BDL sonic gauge is commonly used for measuring the thickness of cylinder walls, intake or exhaust ports, chassis, tubing, body panels, and windscreens. It also has the ability to scan the length of a part to find the minimum thickness.

The time-based B-Scan feature of the SG80BDL sonic gauge displays a cross section of the opposite surface, allowing engine builders the ability to see the contour of the back surface in cylinders while scanning.

Use the Echo-Echo ThruPaint™ feature of the SG80BDL sonic gauge to measure chasis tubing with or without paint and other coatings.

Advantages

Range of display & measurement options: Pulse-Echo, Echo-Echo ThruPaint™ technology
Multiple calibration and material selection options
Adjustable gain: -30dB to 70dB range
Automatic gain control (AGC)
64 User definable setups
High speed scan: 32 readings per second
Differential and minimal thickness alarm modes
Data output and storage: 12,000 readings and waveforms or B-Scans
Data management software

Đặc điểm kỹ thuật

Model & Part Number	SG80BDL Sonic Gauge
Material thickness digits display	•
Measurement Mode	PE & EE (ThruPaint™)
Measurement Rate: Manual: Scan Mode:	4 readings per second 32 readings per second
Measuring Range	PE 0.63 - 254mm (0.025 - 9.999 inches) EE 1.27 - 102 mm (0.050 - 4 inches)
Measurement Accuracy	±0.01mm (±0.001 inch)
Measurement Resolution	0.01mm (0.001 inch)
Velocity Calibration Range	1250 - 10,000m/s 0.0492 - 0.3937in/μs
Additional Features:
High speed scan mode	•
Limit alarm mode	•
Data logging	12,000 readings (+ B Scans)
Calibration Options	1 & 2 point, velocity and material selection
Transducer Probe Type	dual element
Transducer Frequency Range	1 - 10MHz
V-path / dual path error correction	automatic
Display	1/8 VGA
Units (selectable)	mm or inches
LED Backlight	on / off / auto
Repeatability / Stability Indicator	•
Battery Type	3 x AA alkaline
Battery Life (approximate)	150 hours
Low Battery Indicator	•
Battery Save Mode	auto
Operating Temperature	-10 to 60ºC (14 to 140ºF)
Size (w x h x d)	63.5 x 165 x 31.5mm 2.5 x 6.5 x 1.24 inches
Weight (including batteries)	383g (13oz)
Aluminium case design with gasket sealed end caps, waterproof membrane keypad	•
Transducer Connector Type	LEMO
RS232 Interface	•
Packing List	Elcometer NDT SG80BDL gauge, couplant, carry case, user manual, test certificate, 3 x AA batteries, software, transfer cable

Phụ kiện

Cables & Adaptators
d
TL-24031	RS232 Cable (6'); DB-9 to Lemo
TL-24032	USB to Serial Adapter

Couplant
d
TC-24034-1	Couplant: Standard; 4oz Bottle (Material Safety Data Sheet)
TC-24034-2	Couplant: Standard; 12oz Bottle (Material Safety Data Sheet)
TC-24034-3	Couplant: Standard; 1 Gallon (Material Safety Data Sheet)

Other Accessories
d
TZ-24038	Spring Loaded Probe Holder (V-Block)
TZ-24039	Hammer Transducer (Cylinder Kit)

SG80BDL Sonic Gauge

Mô tả

Advantages

Đặc điểm kỹ thuật

Phụ kiện