Elcometer 510 Automatic Pull-Off Adhesion Gauge

The Elcometer 510 Automatic Pull-Off Adhesion Gauge accurately measures the adhesion strength of coatings on a wide range of substrates.

Automatic hydraulic pump ensures smooth and continuous pressure application for consistent, repeatable adhesion strength results
Fully adjustable pull rates 0.1-1.4MPa/s (14.5-203psi) to meet National and International Standards
Can be used with 10,14.2, 20 and 50mm diameter dollies
User definable limits with unique pressure hold and release function
User definable measurement range with an accuracy of ±1% of full scale:
- 10mm dolly: 100MPa (14400psi
- 14.2mm dolly: 50MPa (7200psi)
- 20mm dolly: 25 MPa (3600psi)
- 50mm dolly: 4MPa (580psi)
Dust and water resistant rugged design to IP64
Interchangeable units: MPa, psi, Nmm² and N
A range of standard and thin substrate actuator skirts (compatible with Elcometer 506) available for adhesive strength testing on thick, thin, flat or convex substrates
Store up to 60,000 readings with individual pull graphs in up to 2,500 alpha numerical batches, complete with attribute failure information
USB and Bluetooth^® data output - compatible with ElcoMaster^® App for iPhone, iPod, iPad and Android mobile devices

Key Features Explained

Automatic adhesion tester with selectable pull rates for 10, 14.2, 20 & 50mm diameter dollies.	View adhesion trend graphs or live statistics alongside the reading value.	Individual user definable adhesion pull rate graphs can be saved with each reading.


Stores individual adhesion strength readings and pull rate graphs in up to 2,500 alpha numeric batches, together with date, time and attribute information.	Either pull to maximum or pull to preset limit. Unique time hold feature allows users to set a delay before pressure returns to zero.	Save cohesive and adhesive failure attributes alongside your adhesion pull data in accordance with National and International Standards.

Powered by either standard rechargeable batteries or AC mains*. Each battery charge performs up to 200 pulls. Battery recharge time less than 300 minutes.	Transfer data to your PC via USB or Bluetooth^® for further analysis with ElcoMaster^® software or view live pull rate graphs in ElcoMaster^® during the test.	Using wireless Bluetooth^® communication link the gauge to an Android™ or iPhoneǂ mobile device. Live GPS coordinates from your mobile device can be added to reports and emailed instantly.


A range of standard and thin substrate actuator skirts allow each gauge to be use with 10, 14.2, 20 or 50mm diameter reusable dollies, ideal for testing coatings on thick, thin, flat or convex substrates.	The optional magnetic anchor clamp ensures the actuator doesn't fall during tests on vertical surfaces or testing at height.	Supplied in a robust plastic carry case for easy transportation to and around the job site.

* Model T only.

ǂ iPod, iPhone and iPad compatible

Assessing The Results - Failure Attributes
Many National and International Standards, including ISO 4624 & ASTM D4541, require the user to record not only the adhesion pull-off force but also the nature of the failure. This is done by examining the bottom of the dolly and assessing the failure. In ‘Advanced’ mode on the Elcometer 510 it is possible to select the 'Attributes' feature (Menu/Setup/Gauge Mode/Advanced) allowing the nature of the fracture to be recorded against each reading and stored within the batch.


Examining The Dolly
a) Cohesive Failure: The coating fails within the body of a coating layer leaving the same coating on the surface and on the dolly face.
b) Adhesive Failure: Failure occurs at the interface between layers (intercoat) where one pulls away from the other. The “coating” on the dolly face will not be the same as that on the test area.
c) Glue Failure: When no coating is present on the dolly it must be recorded as a failure of the glue. This maybe due to incorrect or insufficient mixing of the component parts of the adhesive, incompatibility between the adhesive/coating/dolly/test surface.


Cohesive Failure Layer^d		Adhesive Failure Layers
Code	Description	Code	Description
A	Substrate	A/B	Substrate & Layer 1
B	Layer 1	B/C	Layer 1 & Layer 2
C	Layer 2	C/D	Layer 2 & Layer 3
D	Layer 3	D/E	Layer 3 & Layer 4
E	Layer 4	E/F	Layer 4 & Layer 5
F	Layer 5	F/Y	Layer 5 & Glue
Y	Glue	Y/Z	Glue & Dolly


The data is saved in the batch and can be viewed at any time displayed as ##.## MPa^e N% A M% A/B, where; ##.## MPa^e = Pull Force in MPa or other measurement units (psi, Newtons or Nmm^-2) N% = Cohesive failure percentage^f A = Cohesive failure layer M% = Adhesion failure percentage^f A/B = Intercoat adhesive failure layers

^d The number of layers can be user defined for each batch via Batch/New Batch/Number of Layers. This will affect the number of layers available for selection during attribute recording. The maximum number of layers available is five, excluding the substrate and glue. ^e Or equivalent units. ^f To the nearest 10%, in line with International Standards.

Elcometer 510 Model T: Made for iPhone 5S, iPhone 5C, iPhone 5, iPhone 4S, iPhone 4, iPad (4th generation), iPad mini, iPad 2, and iPod touch (4th and 5th generation).“Made for iPod,” “Made for iPhone,” and “Made for iPad” mean that an electronic accessory has been designed to connect specifically to iPod, iPhone, or iPad, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod, iPhone, or iPad may affect wireless performance. iPad, iPhone, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a trademark of Apple Inc., registered in the U.S. and other countries.

Suitable for mobile devices running Android™ software version 2.1 and upwards. Elcometer is a registered trademark of Elcometer Limited. All other trademarks acknowledged.

Technical Specification

Product Features
			Model S	Model T
Repeatable & reproducible measurements			■	■
Easy to use menu structure; multiple languages			■	■
Tough, impact, waterproof & dust resistant; equivalent to IP64			■	■
Bright LCD colour screen; with ambient light sensor			■	■
Scratch & solvent resistant display; 2.4” (6cm) TFT			■	■
Calibration certificate			■	■
2 year gauge warranty			■	■
Automatic rotating display; 0°, 180°			■	■
Data output via USB (Live readings - and batch)			■	■
Data output via Bluetooth^®				■
PC command; start & stop gauge from a PC with live readings (USB only)				■
Switchable Units (mPa, psi, N, Nmm^-2)			■	■
On-Screen Statistics (η, x, σ, hi, lo, COV, N>hi limit^♦)			■	■
Trend Graph			■	■
Pull Rate Graph (Load v Time)				■
Interchangeable Dolly Selection; 10, 14.2, 20 & 50mm			■	■
User Selectable Pull Rates; (Model S & Model T Standard Mode)⁺
10mm: 1.00, 2.00, 3.00, 4.00, 5.00 MPa/s 14.2mm: 0.4, 0.7, 1.4, 2.0, 2.5 MPa/s 20mm: 0.2, 0.3, 0.7,1.0, 1.2 MPa/s 50mm: 0.04, 0.08, 0.12, 0.16, 0.20 MPa/s	125, 200, 400, 600, 725psi/s 60, 100, 200, 300, 360psi/s 30, 50, 100, 150, 180psi/s 5, 8, 16, 24, 30psi/s		■	■
User Selectable Pull Rates; (Model T Advanced Mode)⁺
10mm: 0.4 - 5.60 MPa/s 14.2mm: 0.2 - 2.80 MPa/s 20mm: 0.1 - 1.40 MPa/s 50mm: 0.02 - 0.22 MPa/s	58 - 812psi/s 29 - 403psi/s 15 - 203psi/s 2 - 32psi/s	in 0.1MPa / 1psi steps in 0.1MPa / 1psi steps in 0.1MPa / 1psi steps in 0.01MPa / 0.1psi steps		■
User Selectable Limit & Limit Hold Time				■
Gauge Memory; maximum number of readings			60	60,000*
Number of Batches (Alpha Numeric - Model T)			1	2,500
Attribute Modes to meet National & International Standards				■
Display Modes
Readings, Selected Stats & Run Chart (last 20 readings)			■	■
Pull Rate Graphs				■
Batch Review				■
Power; Battery (B), AC Mains Power (M)			B	B, M
USB Cable & ElcoMaster^® CD			■	■
Power Cable with Multi International Plug Adaptor (UK, EU, US, AUS)				■
Plastic Transit Case				■
Date & Time				■
In Field Adhesion Calibration Verfification Mode				■

^♦Model T only

* When ‘Rate Graph’ is enabled, the number of readings which can be stored is reduced depending on the graph resolution selected

⁺Please refer to the User Guide for further information on all units

Model Options
Part Number	Description			Certificate
F510-20S	Elcometer 510 Model S Automatic Adhesion Gauge; 20mm Kit			•
F510-20T	Elcometer 510 Model T Automatic Adhesion Gauge; 20mm Kit			•
F510-50S	Elcometer 510 Model S Automatic Adhesion Gauge; 50mm Concrete Kit			•
F510-50T	Elcometer 510 Model T Automatic Adhesion Gauge; 50mm Concrete Kit			•

Technical Specification
Pressure Accuracy	±1% of full scale		Pull Rate Accuracy	±(2.5% + 0.3 seconds)
Pressure Resolution	0.01MPa (1 psi)		Pull Rate Resolution	0.01MPa (1psi/s)
Dolly Diameter	10mm (0.39”)	14.2mm (0.56”)	20mm (0.76”)	50mm (1.96”)
Operating Range	8 to 100 MPa (1200 to 14400 psi)	4 to 50 MPa (600 to 7200 psi)	2 to 25 MPa (300 to 3600 psi)	0.3 to 4 MPa (50 to 580 psi)
Pull Rate Range	0.4 - 5.6MPa/s (58 - 812psi/s)	0.2 - 2.8MPa/s (29 - 403psi/s)	0.1 - 1.4MPa/s (15 - 203psi/s)	0.02 - 0.22MPa/s (2 - 32psi/s)
Gauge Dimensions	260 x 100 x 66mm (6.3 x 3.9 x 2.6”)
Actuator Height	85mm (3.4”)	85mm (3.4”)	85mm (3.4”)	110mm (4.3”)
Instrument Weight	2.9kg (6.4lb)	2.9kg (6.4lb)	2.9kg (6.4lb)	3.1kg (8.3lb)
Kit Weight	-	-	6.1kg (13.5lb)	7.3kg (16.1lb)
Power Supply	8 x AA NiMH/Alkaline batteries (16 rechargeable batteries supplied complete with charger) or AC mains power (Model T only)
Battery Life	~200 pulls per charge up to 25MPa (3600psi) at 1MPa/s (150psi/s), recharge time less than 5 hours
Packing List: 20mm Kit	Elcometer 510 Adhesion Tester with 20mm dollies (x10), standard skirt for 20mm dollies, 20mm dolly cutter handle, 20mm dolly cutter, Araldite standard two part epoxy adhesive (2 x 15ml tubes), abrasive pad, shoulder harness, carry case, 16 x AA MiMH rechargeable batteries & charger (UK, EU, US, AUS), mains power supply (UK, EU, US, AUS) (Model T), ElcoMaster^® CD & USB cable, calibration certificate and operating instructions.
Packing List: 50mm Kit	Elcometer 510 Adhesion Tester with 50mm dollies (x6), standard skirt for 50mm dollies, 50mm dolly cutter arbor, 50mm dolly cutter, Araldite standard two part epoxy adhesive (2 x 15ml tubes), abrasive pad, shoulder harness, carry case, 16 x AA MiMH rechargeable batteries & charger (UK, EU, US, AUS), mains power supply (UK, EU, US, AUS) (Model T), ElcoMaster^® CD & USB cable, calibration certificate and operating instructions.

STANDARDS:

ASTM C1583, ASTM D4541, ASTM D7234-12, AS/NZS 1580.408.5, BS 1881-207, DIN 1048-2, EN 1015-12,
EN 12636, EN 13144, EN 1542, EN 24624, ISO 16276-1, ISO 4624, NF T30-606, NF T30-062

• Calibration Certificate supplied as standard.

Dollies	Dolly Diameter	Pack of 10*	Pack of 100
	10mm (0.39”)	T5100010AL-10	T5100010AL-100
	14.2mm (0.56”)	T9990014AL-10	T9990014AL-100
	20mm (0.76”)	T9990020AL-10	T9990020AL-100
	50mm (1.96”)	T9990050AL-4	-
	50mm (1.96”) Stainless Steel	T9990050SS-4	-
	*50mm (2”) dollies are supplied in packs of 4.

Dolly Skirts	Diameter	Standard Skirt	Thin Substrate Skirt
	10mm (0.39”)	T9991420S	-
	14.2mm (0.56”)	T9991420S	T9990014T
	20mm (0.76”)	T9991420S	T9990020T
	50mm (1.96”)	T9990050S	-
	50mm (1.96”) Stainless Steel	-	-

Adhesion Verification Unit	Description	Part Number
	Elcometer AVU Adhesion Verification Unit	T99923924
	Elcometer AVU Adhesion Verification Unit - Certified	T99923924C

Dolly Cutters	Description	Dolly Cutter Handle	Dolly Cutter
	10mm (0.39”)	-	-
	14.2mm (0.56”)	T9991420H	T9990014CT
	20mm (0.76”)	T9991420H	T9990020CT
	50mm (1.96”)	T9990050H	T9990050CT
	50mm (1.96”) Stainless Steel	-	-

Magnetic Anchor Clamp	Description	Part Number
	Magnetic Anchor Clamp - holds actuator securely during tests on vertical surfaces	T99923797

Adhesive	Description	Part Number
	Araldite Standard Two Part Epoxy Adhesive, 2 x 15ml Tubes	T99912906

Dolly Cleaning Heating Tongs	Description	Part Number
	Dolly Cleaning Heating Tongs - EUR 220V / UK 240V	T99923147
	Dolly Cleaning Heating Tongs - US 110V (No Plug)	T99923103

Thiết bị kiểm tra bám dính dạng dật Elcometer 510

Mô tả

The Elcometer 510 Automatic Pull-Off Adhesion Gauge accurately measures the adhesion strength of coatings on a wide range of substrates.

Đặc điểm kỹ thuật

Technical Specification

Phụ kiện

Accessories